TigerTurbo™ - TigerStop Products

Call Us

TigerStop Customer Service

Phone: +1 (360) 448 6102

TigerStop Sales

Phone: +1 (360) 254 0661 ext 2

TigerStop Headquarters

Phone: +1 (360) 254-0661

 

 

Select Your Location

TigerTurbo™ Parts

10′ Controller Cable

Part Number: CC5-10

This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-10 is 10 feet (3.0 m) long.

2″ Printer Labels

Part Number: PR2-LBL

These labels are compatible with TigerStop's direct thermal label printers. Label dimensions are 2.25" by 1.25". Each PR2-LBL includes three rolls of labels with 1000 labels per roll.

20′ Controller Cable

Part Number: CC5-20

This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-20 is 20 feet (6.1 m) long.

20′ IO Cable

Part Number: IOC6-X

20' I/O extension cable (6-pin).

30′ Controller Cable

Part Number: CC5-30

This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-30 is 30 feet (9.1 m) long.

30′ IO Cable

Part Number: IOC6

30' IO extension cable (6-pin).

4″ Printer Labels

Part Number: PR4-LBL

These labels are compatible with the 4" (10.2 cm) direct thermal label printers from Zebra (LP 2844, GC420d, and GK420d). Label dimensions are 4" by 2.5" (10.2 cm by 6.4 cm). Each PR4-LBL includes one roll of labels with 1240 labels per roll.

40′ Controller Cable

Part Number: CC5-40

This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-40 is 40 feet (12.2 m) long.

CON5 Keypad Membrane

Part Number: CON5KPM

The keypad membrane is compatible with the Version 5 Controller (CON5) and cannot be used with older electronics.

Controller Cable 50′

Part Number: CC5-50

This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-50 is 50 feet (15.2 m) long.

Controller Stand

Part Number: SMTCS

The Controller Stand includes mounting hardware and is used for both the Standard Controller and the Tablet Package. It is compatible with TigerStop, TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.

Controller Stand Hardware Pack

Part Number: CSHP

Hardware needed for the controller stand #F0034. Compatible with TigerStop, TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.

Ethernet to Serial Converter

Part Number: ESC

The Ethernet to Serial Converter allows up to two TigerStop machines to be connected to a network via Ethernet cable.

IO Panel

Part Number: IO PANEL

The IO panel interfaces with peripheral devices including barcode scanners, printers, clamps, and Standard Interconnect Kits (SIK). The IO Panel can be used with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. The IO panel is compatible with the Controller (CON5) and Amplifier (AMP6), and cannot be used with older electronics. This part ships with a 10-foot (3.0 m) version 5 controller cable (CC5-10).

Label Printer

Part Number: PR-X

This is a direct transfer printer for systems that are already enabled for printing. To add printing to an existing system, contact TigerStop customer service: service@tigerstop.com. The data cable and a roll of 4 by 2.5 inch (10.2 by 6.4 cm) labels are included. Consumable printer ribbons are not required for direct thermal printing.

Label Printer Package

Part Number: PR-X-PKG

This package includes a direct transfer label printer, printer stand (PRTCVR), and the printing enable code PR0. NOTE: Does not include a TABLET-PKG and must be used with one.

Label Printer Stand

Part Number: PRTCVR

Printer stand for label printers. The printer stand can be purchased separately, but does come with the Printer Package #TABLET-PRINT-PKG.

Limit Switch for Standard Interconnect Kit

Part Number: IKLS

This roller switch is used in the Standard Interconnect Kit. It is also used as an end-sensor for the TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.

Metal Value Pack 10′

Part Number: MVPK10

The 10 foot (3 meter) Metal Value pack is for TigerStop machines up to 12 feet overall length (TS10).

Metal Value Pack 20′

Part Number: MVPK20

The 20 foot (6 meter) Metal Value pack is for TigerStop machines up to 22 feet overall length (TS20).

Power Cable

Part Number: PC

Power cable for all TigerStop, TigerFence, TigerCrossCut, and SawGear products #J0208.

Printer Cable

Part Number: PRCSMT

This is a replacement printer data cable. This cable connects a label printer (or the breakout box on an inkjet printing system) to the I/O panel.

Serial Extender

Part Number: SX

The Serial Extender is a kit with additional cabling that is used for machines over 16 feet in overall length that are using TigerTouch.

Spare Tablet

Part Number: TABLET

Replacement TigerTouch Tablet. E0008

Standard Controller

Part Number: CON5

The controller (CON5) is the interface for most TigerStop positioners, and consists of a keypad and screen. CON5 is compatible with TigerStop, TigerFence (and SLR), TigerTurbo, TigerRack, and HeavyDuty 2. CON5 requires an Amplifier (AMP6 or AMP5) and is not compatible with older controllers or with SawGear stop gauges.

Standard Controller Cover

Part Number: CON5CVR

Protective controller cover for Version 5 controllers. Made from clear plastic. Helps protect the controller from metal and wood dust and lubricants.

Standard Interconnect Kit

Part Number: SIK

The standard interconnect kit is one way of integrating TigerStop machinery with your tool. A roller switch is used to inform the positioner when the tool is at rest, preventing simultaneous movement of the two machines. Additionally, that communication allows for semi-automatic pushing operations.

Tablet Package

Part Number: TABLET-PKG

TigerStop's Tablet Package includes a touch screen, a protective case, control stand (SMTCS), and cabling. It also includes three types of software: TigerLink 6 Cut List Downloading (DNLD), TigerSET (SET), and Dynamic Optimization (OPT).

Tablet Print Package

Part Number: TABLET-PRINT-PKG

The TigerStop label printer package includes a direct transfer label printer, printer stand (PRTCVR) the TigerTouch Tablet Package, and the printing enable code PR0. Dozens of fields of data may be printed.

TigerFence & TigerCrossCut Motor

Part Number: MOT-TF

TigerFence & TigerCrossCut replacement motor kit.

TigerTurbo Carriage

Part Number: STOP-TT

TigerTurbo carriage. M0081-3

TigerTurbo Gangstop

Part Number: GSX-TT-HD2

This is a flat pusher attachment for the TigerTurbo or the HeavyDuty 2. The pushing surface is 12 by 4 inches (30.5 by 10.2 cm). This attachment's reach is 20 inches (50.8 cm) beyond the leading edge of the carriage it is attached to. SB7115

TigerTurbo Internal Stop Carriage

Part Number: ISC-TT

TigerTurbo internal stop carriage replacement. SB7100

TigerTurbo Motor

Part Number: MOT-TT

This is an AC motor for the TigerTurbo. SB7274

TigerTurbo Motor Conversion Kit

Part Number: AC-CONV

This kit contains the parts needed to upgrade a TigerTurbo from the older DC motor to the modern AC motor.

TigerTurbo Motor Drive Belt

Part Number: DB-TT

For TigerTurbo AC motor. M1415

Wired Barcode Scanner

Part Number: BCS

Barcode scanners can be used with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. Barcode scanner compatibility requires the SET feature (software that opens up communication between peripheral devices).

Wireless Barcode Scanner

Part Number: BCSW

Barcode scanners can be used with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. The wireless barcode scanner comes with the scanner base, data cable, RS232 cable, and the power supply.

Spring Buffer for TigerTurbo & HeavyDuty 2- Left Hand

Part Number: SBHD-L

This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. Left-handed means that the positioner is to the left of the integrated tool.

Spring Buffer for TigerTurbo & HeavyDuty 2- Right Hand

Part Number: SBHD-R

This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. Right-handed means that the positioner is to the right of the integrated tool.

HeavyDuty 2 and TigerTurbo Scanning and Defecting Pusher Foot

Part Number: SCAN-HD

For both TigerTurbo and HeavyDuty 2 machines. Scan material and automatically defect it.