TigerSaw™ 1000 Parts

TigerSaw™ Idle Pulley Assembly

Part Number: BP-TSS

This is a replacement idle pulley for TigerSaw™ saw systems.

TigerSaw™ 1000 Printer Cartridge

Part Number: PC-TSS

This is a printer cartridge for the inkjet printing system designed for absorbent surfaces like wood. Not for non-absorbant surfaces. LP3920

TigerSaw™ Arbor Drive Belt

Part Number: DB-TSS

This belt connects the saw motor to the saw arbor in a TigerSaw™ 1000, TigerSaw™ 1000G2, or TigerSaw™ 2000. M10272

Saw Blade (450 mm Fine Crosscut #BLADE)

Part Number: BLADE

This blade is compatible with the TigerSaw™ 1000 and the TigerSaw™ 2000. It is intended for wood applications where cut quality is the most important consideration. M10800

Saw Blade (500 mm Fine Crosscutting #BLADE-5)

Part Number: BLADE-5

This blade is compatible with the TigerSaw™ 1000 (second generation saw only) and the TigerSaw™ 2000. It is intended for wood applications where cut quality is the most important consideration. M10890

Saw Blade (450 mm Hollow Extrusion #BLADE-M)

Part Number: BLADE-M

This blade is compatible with the TigerSaw™ 1000 and the TigerSaw™ 2000. It is designed for cutting hollow aluminum or non-ferrous extrusions. M10820

Saw Blade (500 mm Hollow Extrusion #BLADE-M5)

Part Number: BLADE-M5

This blade is compatible with the TigerSaw™ 1000 (second generation saw only) and the TigerSaw™ 2000. It is designed for cutting hollow aluminum extrusions. M10860

Saw Blade (450 mm Solid Extrusion #BLADE-MS)

Part Number: BLADE-MS

This blade is compatible with the TigerSaw™ 1000 and the TigerSaw™ 2000. It is designed for cutting solid aluminum and non-ferrous metal extrusions. M10830

Saw Blade (500 mm Solid Extrusion #BLADE-MS5)

Part Number: BLADE-MS5

This blade is compatible with the TigerSaw™ 1000 (second generation saw system) and the TigerSaw™ 2000. It is designed for cutting solid aluminum and non-ferrous metal extrusions. M10870

Saw Blade (450 mm Pack Cutting #BLADE-PS)

Part Number: BLADE-PS

This blade is compatible with the TigerSaw™ 1000 and the TigerSaw™ 2000. It is intended for wood applications where throughput is the most important consideration. M10810

Saw Blade (500 mm Pack Cutting #BLADE-PS5)

Part Number: BLADE-PS5

This blade is compatible with the TigerSaw™ 1000 (second generation saw system) and the TigerSaw™ 2000. It is intended for wood applications where throughput is the most important consideration. M10880

CON5 Keypad Membrane

Part Number: CON5KPM

The keypad membrane is compatible with the Version 5 Controller (CON5) and cannot be used with older electronics.

Standard Controller

Part Number: CON5

The controller (CON5) is the interface for most TigerStop® positioners, and consists of a keypad and screen. CON5 is compatible with TigerStop®, TigerFence (and SLR), TigerTurbo, TigerRack, and HeavyDuty 2. CON5 requires an Amplifier (AMP6 or AMP5) and is not compatible with older controllers or with SawGear® stop gauges.

Tablet Package

Part Number: TABLET-PKG

The TigerStop® Tablet Package includes a touch screen, a protective case, control stand (SMTCS), and cabling. It also includes three types of software: TigerLink 6 Cut List Downloading (DNLD), TigerSET (SET), and Dynamic Optimization (OPT).

Spare Tablet

Part Number: TABLET

Replacement TigerTouch Tablet. E0008

Tablet Print Package

Part Number: TABLET-PRINT-PKG

The TigerStop® label printer package includes a direct transfer label printer, printer stand (PRTCVR) the TigerTouch Tablet Package, and the printing enable code PR0. Dozens of fields of data may be printed.

TigerSaw™ 1000 Soft Start

Part Number: SS-TSS

TigerSaw™ 1000 Soft Start 460 Volts/480V. J9894

TigerSaw™ Back Fence Throat Plate- Generation 2

Part Number: BFTP-TSSG2

This is the throat plate for the back fence on the TigerSaw™ 1000G2 and TigerSaw™ 2000. It is not compatible with TigerSaw™ 1000G1 (models from 2016 and before).

Top Cap

Part Number: TOPCAP

Top Cap for TigerSaw™ 1000 and TigerSaw™ 2000.

2" Printer Labels

Part Number: PR2-LBL

These labels are compatible with the TigerStop® direct thermal label printers. Label dimensions are 2.25" by 1.25". Each PR2-LBL includes three rolls of labels with 1000 labels per roll.

Label Printer

Part Number: PR-X

This is a direct transfer printer for systems that are already enabled for printing. To add printing to an existing system, contact TigerStop® customer service: service@tigerstop.com. The data cable and a roll of 4 by 2.5 inch (10.2 by 6.4 cm) labels are included. Consumable printer ribbons are not required for direct thermal printing.

TigerSaw™ Absorbent Ink Jet Printer- Right Handed

Part Number: DOD-RH

The TigerSaw™ Ink Jet Printer uses absorbent ink for porous materials like hardwood and softwood. Right handed machine configuration.

TigerSaw™ Non-Absorbent Ink Jet Printer- Left Handed

Part Number: DOD-LH-NA

The TigerSaw™ Ink Jet Printer uses non-absorbent ink for non-porous materials like plastic and metal. Left handed configuration.

TigerSaw™ Non-Absorbent Ink Jet Printer- Right Handed

Part Number: DOD-RH-NA

The TigerSaw™ Ink Jet Printer uses non-absorbent ink for non-porous materials like plastic and metal. Right handed configuration.

TigerSaw™ 1000 & 2000 Amplifier

Part Number: AMP6-TSS

TigerSaw™ Amplifiers are quite similar to TigerStop® Amplifiers (AMP6) with an additional port to support the inkjet printing option. AMP6-TSS

TigerSaw™ Blade Dust Ramp

Part Number: M9915

TigerSaw™ 1000 and TigerSaw™ 2000 blade dust ramp. M9915

TigerSaw™ Double Push Button Switch

Part Number: J6640

Start and stop button. Double push button switch, illuminated green and red, for TigerSaw™ 1000 and TigerSaw™ 2000. J6640

TigerSaw™ Guard Door Glide

Part Number: B9809

Glide Accuride 301 28" 301-28 for the TigerSaw™ 1000 and TigerSaw™ 2000 guard door. B9809

TigerSaw™ Guard Door Slide

Part Number: M9938

TigerSaw™ 1000 and TigerSaw™ 2000 Guard Door Slide. M9938

TigerSaw™ Guard Latch Mount

Part Number: M9937

TigerSaw™ 1000 and TigerSaw™ 2000 guard latch mount. M9937

TigerSaw™ Guard Screen Frame

Part Number: M9904

TigerSaw™ 1000 and TigerSaw™ 2000 guard screen frame. M9904

TigerSaw™ Handle

Part Number: F2245

TigerSaw™ handle, 5.75" pull 0.25" hole. F2245

TigerSaw™ Interlock Bracket

Part Number: M9908

TigerSaw™ 1000 and TigerSaw™ 2000 interlock bracket. M9908

TigerSaw™ Motor Coupler

Part Number: M9981-3

TigerSaw™ 1000 and TigerSaw™ 2000 motor coupler. Steel Ra 64". M9981-3

TigerSaw™ Safety Latch Key

Part Number: J6950

TigerSaw™ safety latch key. J6950

TigerSaw™ Scanning Foot Block

Part Number: M8580

TigerSaw™ 1000 and TigerSaw™ 2000 scanning foot block, black pvc. M8580

TigerSaw™ Swivel Leveling Foot

Part Number: F9851

Swivel Leveling Foot M16 M. F9851

TigerSaw™ Wheel Handle

Part Number: F9853

TigerSaw™ 1000 and TigerSaw™ 2000 handle. 4" wheel 0.38" hole w/2.2" handle Al black. F9853