TigerFence Parts
Amplifier
Part Number: AMP6
The amplifier (AMP6) is the circuit board driving the motor in most TigerStop® positioners. AMP6 is compatible with TigerStop®, TigerFence (and TigerFence StraightLineRip), TigerCrossCut, TigerTurbo, TigerRack,and HeavyDuty2.
CON5 Keypad Membrane
Part Number: CON5KPM
The keypad membrane is compatible with the Version 5 Controller (CON5) and cannot be used with older electronics.
Controller Stand
Part Number: SMTCS
The Controller Stand includes mounting hardware and is used for both the Standard Controller and the Tablet Package. It is compatible with TigerStop®, TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.
Controller Stand Hardware Pack
Part Number: CSHP
Hardware needed for the controller stand #F0034. Compatible with TigerStop®, TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.
Standard Controller
Part Number: CON5
The controller (CON5) is the interface for most TigerStop® positioners, and consists of a keypad and screen. CON5 is compatible with TigerStop®, TigerFence (and SLR), TigerTurbo, TigerRack, and HeavyDuty 2. CON5 requires an Amplifier (AMP6 or AMP5) and is not compatible with older controllers or with SawGear® stop gauges.
Standard Controller Cover
Part Number: CON5CVR
Protective controller cover for Version 5 controllers. Made from clear plastic. Helps protect the controller from metal and wood dust and lubricants.
Encoder
Part Number: ENC
This rotary Encoder works with TigerStop® and TigerFence. The cable connecting the encoder to the amplifier is included.
IO Panel
Part Number: IO PANEL
The IO panel interfaces with peripheral devices including barcode scanners, printers, clamps, and Standard Interconnect Kits (SIK). The IO Panel can be used with TigerStop®, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. The IO panel is compatible with the Controller (CON5) and Amplifier (AMP6), and cannot be used with older electronics. This part ships with a 10-foot (3.0 m) version 5 controller cable (CC5-10).
Dust Seal Strip
Part Number: DS
Dust seal strip helps keep dust and debris out of the TigerStop® beam. Dust seal strip is ordered in a single strip in 1 foot (0.305m) increments. Every TigerStop® has two dust seal strips the full length of the beam.
Ethernet to Serial Converter
Part Number: ESC
The Ethernet to Serial Converter allows up to two TigerStop® machines to be connected to a network via Ethernet cable.
Idle End Cap
Part Number: EC2
The Idle End Cap is a plate that covers the end of the TigerStop® extrusion that is far from the motor.
Label Printer
Part Number: PR-X
This is a direct transfer printer for systems that are already enabled for printing. To add printing to an existing system, contact TigerStop® customer service: service@tigerstop.com. The data cable and a roll of 4 by 2.5 inch (10.2 by 6.4 cm) labels are included. Consumable printer ribbons are not required for direct thermal printing.
Label Printer Package
Part Number: PR-X-PKG
This package includes a direct transfer label printer, printer stand (PRTCVR), and the printing enable code PR0. NOTE: Does not include a TABLET-PKG and must be used with one.
Label Printer Stand
Part Number: PRTCVR
Printer stand for label printers. The printer stand can be purchased separately, but does come with the Printer Package #TABLET-PRINT-PKG.
Power Cable
Part Number: PC
Power cable for all TigerStop®, TigerFence, TigerCrossCut, and SawGear® products #J0208.
Printer Cable
Part Number: PRCSMT
This is a replacement printer data cable. This cable connects a label printer (or the breakout box on an inkjet printing system) to the I/O panel.
Tablet Package
Part Number: TABLET-PKG
The TigerStop® Tablet Package includes a touch screen, a protective case, control stand (SMTCS), and cabling. It also includes three types of software: TigerLink 6 Cut List Downloading (DNLD), TigerSET (SET), and Dynamic Optimization (OPT).
Tablet Print Package
Part Number: TABLET-PRINT-PKG
The TigerStop® label printer package includes a direct transfer label printer, printer stand (PRTCVR) the TigerTouch Tablet Package, and the printing enable code PR0. Dozens of fields of data may be printed.
U Slot
Part Number: USL
This hard plastic trim fits snugly in the T-slots on TigerStop® extrusions, and is sometimes used to conceal and protect small cables. U-slot is ordered in 1 foot (0.305m) increments. There are four orange U Slots per TigerStop® that travel the length of the extrusion.
Wired Barcode Scanner
Part Number: BCS
Barcode scanners can be used with TigerStop®, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. Barcode scanner compatibility requires the SET feature (software that opens up communication between peripheral devices).
Wireless Barcode Scanner
Part Number: BCSW
Barcode scanners can be used with TigerStop®, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. The wireless barcode scanner comes with the scanner base, data cable, RS232 cable, and the power supply.
2" Printer Labels
Part Number: PR2-LBL
These labels are compatible with the TigerStop® direct thermal label printers. Label dimensions are 2.25" by 1.25". Each PR2-LBL includes three rolls of labels with 1000 labels per roll.
Rip Fence for TigerFence
Part Number: XA0912-1
43.5" aluminum extrusion rip fence for TigerFence.
TigerFence & TigerCrossCut Drive Belt
Part Number: DB-RF
TigerFence & TigerCrossCut Drive Belt.
TigerFence & TigerCrossCut Idle End Sensor
Part Number: IES-RF
The TigerFence & TigerCrossCut idle end sensor is also commonly called the far end sensor. *Not to be confused with MES-RF which has shorter cabling.
TigerFence & TigerCrossCut Motor
Part Number: MOT-TF
TigerFence & TigerCrossCut replacement motor kit.
TigerFence & TigerCrossCut Motor End Sensor
Part Number: MES-RF
TigerFence & TigerCrossCut motor end sensor. *Not to be confused with IES-RF which has longer cabling.
TigerFence Mounting Bracket
Part Number: TF-MB
Mounting bracket. Also for TigerFences paired with SawStop Professional model table saws and other brand table saws. *Not designed for sliding table saws.