SawGear Touch® Parts
SawGear® Belt 12'
Part Number: SG12-AT5
The SawGear® has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG12-AT5 is the large belt for a 12' working length (14' overall length) SawGear®. (That's a 3.7 m working length or 4.3 m overall.) M1495
SawGear® Belt 16'
Part Number: SG16-AT5
The SawGear® has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG16-AT5 is the large belt for a 16' working length (18' overall length) SawGear®. (That's a 4.9 m working length or 5.5 m overall.) M1495
SawGear® Belt 20'
Part Number: SG20-AT5
The SawGear® has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG20-AT5 is the large belt for a 20' working length (22' overall length) SawGear®. (That's a 6 m working length or 6.7 m overall.) M1495
SawGear® Belt 8'
Part Number: SG08-AT5
The SawGear® has two belts: a small drive belt in the power head and a much larger belt in the measuring bar. SG08-AT5 is the large belt for an 8' working length (10' overall length) SawGear®. (That's a 2.4 m working length or 3.0 m overall.) M1495
SawGear® Bench Mount Bracket
Part Number: BR-BM
The bench mount brackets allow you to attach the SawGear® aluminum extrusion measuring bar to your tables of choice. Because we don't know what material the bracket will be mounted on, fasteners are not included. Please note that BR-BM is a set of two bench mount brackets. M1016
SawGear® Carriage Assembly
Part Number: SG-SC
The internal carriage connects the SawGear® belt inside the beam to the flip away outside the beam. It ships with plastic glides and set screws. XMA1000
SawGear® Encoder
Part Number: ENC-SG
This rotary encoder works with SawGear® only. The SawGear® Encoder Cable is included as well.
SawGear® Encoder Cable
Part Number: ENCC-SG
This cable connects the SawGear® motor to the circuit board inside the power head. E1014
SawGear® Flip Away
Part Number: SG-FS
External portion of the SawGear® carriage. It holds the stop bar and is hinged so it can be lifted out of the way. SA2545
SawGear® Measuring Bar Pulley Assembly
Part Number: MB-P
SawGear® measuring bar pulley assembly. M1005
SawGear® Stop Bar
Part Number: SG-SB
Used to position material accurately for processing. SA2555
16' SawGear® Measuring Bar
Part Number: MB16
Essentially a SawGear® without the power head. It is 16' working length (18' overall length).
20' SawGear® Measuring Bar
Part Number: MB20
Essentially a SawGear® without the power head. It is 20' working length (22' overall length).
8' SawGear® Measuring Bar
Part Number: MB08
Essentially a SawGear® without the power head. It is 8' working length (10' overall length).
12' SawGear® Measuring Bar
Part Number: MB12
Essentially a SawGear® without the power head. It is 12' working length (14' overall length).
SawGear® Crown Molding Foot
Part Number: SG-CMF
Designed for cutting crown, baseboard, and trim. The flat pusher foot component is 5.1" x .5" x 4". SA2556
SawGear® Portable Table 12'
Part Number: SGTAB12
A 12' SawGear® (SG12) can be mounted on any existing shop work bench as well as TigerStop® tables.
SawGear® Portable Table 16'
Part Number: SGTAB16
A 16' SawGear® (SG16) can be mounted on any existing shop work bench as well as TigerStop® tables.
SawGear® Portable Table 20'
Part Number: SGTAB20
A 20' SawGear® (SG20) can be mounted on any existing shop work bench as well as TigerStop® tables.
SawGear® Portable Table 8'
Part Number: SGTAB08
An 8' SawGear® (SG08) can be mounted on any existing shop work bench as well as TigerStop® tables.
SawGear® Table Leg
Part Number: SG-TFLG
One table leg for a SawGear® portable table. Use to make the portable tables freestanding. SB2120
SawGear Touch® 8' by TigerStop®
Part Number: SGTOUCH-08
An 8' working length (10' overall length) SawGear Touch® will increase productivity and throughput. Your SawGear Touch® can position parts to +/- .008" repeatable accuracy which will greatly reduce scrap waste and labor.
SawGear Touch® 12′ by TigerStop®
Part Number: SGTOUCH-12
A 12' working length (14' overall length) SawGear Touch® will increase productivity and throughput. Your SawGear® can position parts to +/- .008" repeatable accuracy which will greatly reduce scrap waste and labor.
SawGear Touch® 16′ by TigerStop®
Part Number: SGTOUCH-16
A 16' working length (18' overall length) SawGear Touch® will increase productivity and throughput. Your SawGear® can position parts to +/- .008" repeatable accuracy which will greatly reduce scrap waste and labor.
SawGear Touch® 20′ by TigerStop®
Part Number: SGTOUCH-20
A 20' working length (22' overall length) SawGear Touch® will increase productivity and throughput. Your SawGear® can position parts to +/- .008" repeatable accuracy which will greatly reduce scrap waste and labor.