HeavyDuty 2™ Parts
10′ Controller Cable
Part Number: CC5-10
This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-10 is 10 feet (3.0 m) long.
2″ Printer Labels
Part Number: PR2-LBL
These labels are compatible with TigerStop's direct thermal label printers. Label dimensions are 2.25" by 1.25". Each PR2-LBL includes three rolls of labels with 1000 labels per roll.
20′ Controller Cable
Part Number: CC5-20
This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-20 is 20 feet (6.1 m) long.
30′ Controller Cable
Part Number: CC5-30
This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-30 is 30 feet (9.1 m) long.
40′ Controller Cable
Part Number: CC5-40
This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-40 is 40 feet (12.2 m) long.
CON5 Keypad Membrane
Part Number: CON5KPM
The keypad membrane is compatible with the Version 5 Controller (CON5) and cannot be used with older electronics.
Controller Cable 50′
Part Number: CC5-50
This 15-pin cable connects a Controller (CON5) to an Amplifier (AMP6). CC5-50 is 50 feet (15.2 m) long.
Controller Stand
Part Number: SMTCS
The Controller Stand includes mounting hardware and is used for both the Standard Controller and the Tablet Package. It is compatible with TigerStop, TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.
Controller Stand Hardware Pack
Part Number: CSHP
Hardware needed for the controller stand #F0034. Compatible with TigerStop, TigerFence, TigerCrossCut, TigerRack, TigerTurbo, and HeavyDuty 2.
Ethernet to Serial Converter
Part Number: ESC
The Ethernet to Serial Converter allows up to two TigerStop machines to be connected to a network via Ethernet cable.
HeavyDuty 2 Motor
Part Number: MOT-HD2
This is an AC motor for the HeavyDuty 2. MOT-HD2 is incompatible with version 4 electronics. M0620
IO Panel
Part Number: IO PANEL
The IO panel interfaces with peripheral devices including barcode scanners, printers, clamps, and Standard Interconnect Kits (SIK). The IO Panel can be used with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. The IO panel is compatible with the Controller (CON5) and Amplifier (AMP6), and cannot be used with older electronics. This part ships with a 10-foot (3.0 m) version 5 controller cable (CC5-10).
Label Printer
Part Number: PR-X
This is a direct transfer printer for systems that are already enabled for printing. To add printing to an existing system, contact TigerStop customer service: service@tigerstop.com. The data cable and a roll of 4 by 2.5 inch (10.2 by 6.4 cm) labels are included. Consumable printer ribbons are not required for direct thermal printing.
Label Printer Package
Part Number: PR-X-PKG
This package includes a direct transfer label printer, printer stand (PRTCVR), and the printing enable code PR0. NOTE: Does not include a TABLET-PKG and must be used with one.
Label Printer Stand
Part Number: PRTCVR
Printer stand for label printers. The printer stand can be purchased separately, but does come with the Printer Package #TABLET-PRINT-PKG.
Metal Value Pack 10′
Part Number: MVPK10
The 10 foot (3 meter) Metal Value pack is for TigerStop machines up to 12 feet overall length (TS10).
Metal Value Pack 20′
Part Number: MVPK20
The 20 foot (6 meter) Metal Value pack is for TigerStop machines up to 22 feet overall length (TS20).
Power Cable
Part Number: PC
Power cable for all TigerStop, TigerFence, TigerCrossCut, and SawGear products #J0208.
Printer Cable
Part Number: PRCSMT
This is a replacement printer data cable. This cable connects a label printer (or the breakout box on an inkjet printing system) to the I/O panel.
Standard Controller
Part Number: CON5
The controller (CON5) is the interface for most TigerStop positioners, and consists of a keypad and screen. CON5 is compatible with TigerStop, TigerFence (and SLR), TigerTurbo, TigerRack, and HeavyDuty 2. CON5 requires an Amplifier (AMP6 or AMP5) and is not compatible with older controllers or with SawGear stop gauges.
Standard Controller Cover
Part Number: CON5CVR
Protective controller cover for Version 5 controllers. Made from clear plastic. Helps protect the controller from metal and wood dust and lubricants.
Standard Interconnect Kit
Part Number: SIK
The standard interconnect kit is one way of integrating TigerStop machinery with your tool. A roller switch is used to inform the positioner when the tool is at rest, preventing simultaneous movement of the two machines. Additionally, that communication allows for semi-automatic pushing operations.
Tablet Package
Part Number: TABLET-PKG
TigerStop's Tablet Package includes a touch screen, a protective case, control stand (SMTCS), and cabling. It also includes three types of software: TigerLink 6 Cut List Downloading (DNLD), TigerSET (SET), and Dynamic Optimization (OPT).
Tablet Print Package
Part Number: TABLET-PRINT-PKG
The TigerStop label printer package includes a direct transfer label printer, printer stand (PRTCVR) the TigerTouch Tablet Package, and the printing enable code PR0. Dozens of fields of data may be printed.
Wired Barcode Scanner
Part Number: BCS
Barcode scanners can be used with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. Barcode scanner compatibility requires the SET feature (software that opens up communication between peripheral devices).
Wireless Barcode Scanner
Part Number: BCSW
Barcode scanners can be used with TigerStop, TigerFence (and SLR), TigerCrossCut, TigerTurbo, TigerRack, and HeavyDuty 2. The wireless barcode scanner comes with the scanner base, data cable, RS232 cable, and the power supply.
Spring Buffer for TigerTurbo & HeavyDuty 2- Left Hand
Part Number: SBHD-L
This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. Left-handed means that the positioner is to the left of the integrated tool.
Spring Buffer for TigerTurbo & HeavyDuty 2- Right Hand
Part Number: SBHD-R
This is a flat pushing attachment for the TigerTurbo or HeavyDuty 2. Right-handed means that the positioner is to the right of the integrated tool.
HeavyDuty 2 and TigerTurbo Scanning and Defecting Pusher Foot
Part Number: SCAN-HD
For both TigerTurbo and HeavyDuty 2 machines. Scan material and automatically defect it.
4″ Printer Labels
Part Number: PR4-LBL
These labels are compatible with the 4" (10.2 cm) direct thermal label printers from Zebra (LP 2844, GC420d, and GK420d). Label dimensions are 4" by 2.5" (10.2 cm by 6.4 cm). Each PR4-LBL includes one roll of labels with 1240 labels per roll.