• Overview
  • Documents
  • Specs
  • Accessories
Build Your Own - Configurator Button


The TigerSaw TS350 is a fully automated push feed, saw system. Simply enter your lengths and quantities, load and unload - That’s about it! Save money on material, labor and rework.

Accuracy .008 in .2 mm
Capacity 176 lbs 80 kg
Max Length 26 ft 8 meters


Save money on material, labor and rework.  With rising raw material costs, being able to efficiently cut and optimize your material can be your secret competitive weapon. The optional  Dynamic Optimization will save on material costs.  Being fully automated, the TS350 will increase productivity which saves on labor.  No more setting stops manually, simply enter your cut list,  and place material on the infeed.  The optional Handy Opt or Crayon marking the TS350 will scan the length of the board and where the defects are and automatically push into the saw. This saves on labor and reduces errors with a repeatable accuracy of +/-  0.2 mm.


Optimizes around defects using TigerStop’s Dynamic Optimization software, giving you the maximum possible yield while cutting only what you need.

TigerSaw TS350 can print a label for each cut part !


Your operators can put away their paper crammed clipboards and get a new level of productivity and visibility with TigerTouch, TigerStop’s innovative touch screen software. Operator can select up to 3 different grades or cutlists on the fly allowing them to cut multiple widths at the same time.


A unique feature of the TigerSaw 1000 automated crosscut saw system is our panel layup feature.  Just enter the panel height and the total width of panel material required and TigerSaw 1000 will cut only what’s needed. No more over cutting or counting and measuring on the back end.


Configure it to your needs

From a simple push feed system cutting multiple pieces at a time to a fully automated defect optimizing system, TS350  is your crosscutting solution. Can be configured to optimize between defects or cut on the mark for applications such as flooring or finger jointing.


Dynamic Optimization

TigerSaw’s Dynamic Optimizing will cut the parts you need while achieving the maximum possible yield. If your buying high grade lumber, TS350 with its ability to optimize around defects will allow you to buy a grade lower and still achieve approximately the same fiber yield. This could be as much as a 40% savings in material cost!


 Laser Line  Defect Marking

Simply mark the beginning and end of your defects and  the TS350 does the rest. All defects will be removed and TS350 will optimize all the material in between so you get the best yield.


Label Printing

The TS350 can be equipped with a label printer  that will print a label with  customized part information on each finished piece. This will allow you to batch like jobs and easily sort the parts on the back end.


Precision Length Cutting

TigerSaw TS350 uses TigerStop positioning technology to ensure you get an accurate part the first time…every time.



From design to done, download your parts files to TigerSaw TS350 right from your design software. Any data such as job name or part# contained in your design file can be  printed on a label for each part.