How Do I Test Incoming Power? - TigerStop

Tools Required:

  • Multimeter

Testing:

  • Unplug AC power cable from amplifier
  • Set Multimeter to measure AC Voltage
  • Test all phases as indicated in diagram below
  • Record readings
  • You should expect readings similar to the diagram below (the voltage range indicated  is dependent upon whether you are plugged into 120v or 240v )
  • Please refer to FAQ “What are the Power Requirements for TigerStop Products” for more detailed information
  • If performing this test as a part of troubleshooting with a TigerStop technician, please email readings to service@tigerstop.com
Testing Incoming Power from the Amplifier Power Cable
Testing Incoming Power from the Amplifier Power Cable