SawGear Pulley Removal
- The SawGear pulley assembly (MB-P) is press-fit into the extrusion and locked in place with a retaining clip snapped into a groove on the bottom bearing of the pulley assembly (see illustration a)
- The retaining clip is located in a slow in the extrusion profile (see illustration b)
- In order to replace the pulley assembly, the retaining clip must be removed
- This is achieved by drilling a small hole in the bottom of the extrusion next to the bearing, through which the retaining clip may be pried off of the bearing, releasing the pulley assembly (see illustration c)
