arrow-L-teal.jpg Part List Menu

Waste flag-cdn-qc-35.jpg flag-mx-35.jpg

Waste First / Last is a global parameter applied to all optimized part lists.

If this parameter is set to FIRST, the waste generated in processing a Stock Length will be cut out before the desired Pieces. If set to LAST, the desired Pieces are cut first, and then the waste is processed.


  1. Press [B] or [C] to toggle between first and last.

Waste is a list parameter.


  1. Press [D] to save selection and exit to the Ready Screen.


Factory default value is LAST.