Often times a user may want to take a controller from one machine and place it onto another TigerStop, or place a spare on one of their machines. This can be also be an effective troubleshooting tool. If a problem is experienced on one machine, swapping parts can assist in better identifying the problem component. This is most effective on machines without Diagnostics. When swapping parts, it's important to know if the machines are compatible with one another. See below for compatibility answers.
|
|
Tiger 1 9401001-97100 v1.2-2.1 |
Tiger 2A 971001-982566 v2.2 |
Tiger2C 982567-014890 v2.3-3.1 |
Tiger2 - SMT 014891-Current v3.5-Current |
|
Only compatible with other T1s |
N/A Amplifier The electronic device that drives the TigerStop. It is located inside the motor box. must be upgraded to AMP2C |
Compatible with SMT |
Compatible with 2C machines | |
|
controller |
Only compatible with other T1s |
Must be upgraded to SMT or 2C machine |
Compatible with SMT & 2A machines. (v2.3 requires jumper between pins 5&6 on 6pin port.) |
Compatible with 2C machines |
|
Only compatible with other T1s |
SIK Compatible with 2C Interlock. Jumper between 5 & 6 must be in interlock plug. |
Compatible with 2A and SMT Interlock. To use on 2A Machine, Jumper on 5&6 must be present |
Compatible with 2A and 2C Interlock. To use on 2A Machine, Jumper on 5&6 must be present | |
|
N/A |
N/A |
Only compatible with v3.1 and greater. |
Compatible with v3.1 Interlock | |
|
Belt |
For belt information, click -here- |
|||