It is possible to enable automated movement in setpoint One of three TigerStop operation methods. In Setpoint operation, the TigerStop is used as a backstop with material being pushed against the TigerStop carriage or pusher and the cut is made. The cut material is removed from the saw or application. cut lists. This feature is generally used in applications such as drill presses or boring machines. To enable this feature, the Process parameter in the Operational Menu must be set to a value of 1 and a standard interlock must be installed. For information on accessing the Operational Menu, click here.
|
-Note- This is a feature that is strongly discouraged in cutting devices such as saws as it is an inherently unsafe condition. Automated movement should only take place in push feed cut lists for these devices. |