What is TigerStop Telling Me?

The controller screen displays TigerStop's current status as a letter at the end of the top line. When TigerStop executes a movement or operation, it passes through several stages, indicated by the letter rapidly changing.

H = Holding position: TigerStop is at rest.

A = Accelerating: TigerStop is speeding up from 0 to its target velocity the constant speed at which TigerStop travels from point to point.

C = Constant velocity: TigerStop is travelling at its target velocity.

D = Decelerating: TigerStop is slowing down to 0 velocity.

L = Lash compensation: TigerStop is making an adjustment move to account for lash parameter in the motion menu, compensates for gear box back lash, adjusted to increase TigerStop accuracy when, for example, the drive belt has gradually stretched.

W = Wait: TigerStop is waiting to move, having disabled the interlock solenoid.

X = Drive disabled: For some reason TigerStop's drive is disengaged. TigerStop has cut out and needs to be reset.

TigerRip Fence specific: X = TigerStop is at rest. Drive must be disabled because rip fence handle is in lock down position, and the drive cannot be allowed free movement once it comes to rest.

DM = Dead Man Open: TigerStop "thinks" the interlock limit switch is OPEN and the saw or other tool engaged. The stop can NOT move with this status.