Installing HD2 Pusher Arm

The pusher arm (Fig. 1) must be attached to the HD2 carriage at installation.

Remove carriage cover (Figs. 2, 3, 4).

The pusher arm is secured to the carriage by six bolts and lock washers.

Remove the bolts and washers from the pusher arm (Fig. 5)..

Position the pusher arm under the carriage and bolt it in place (Figs. 6, 7).

Replace the carriage cover (Fig.8).

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Fig. 8

Fig.9

The pusher arm is the standard HD2 carriage attachment.