Parameter Central

Access the Service Menu

To access the Service menu…

  1. At the Ready screen hold down at the same time and then quickly release.

The screen prompts you for a password .

  1. Enter the factory password an unchangeable password used to access restricted menus or functions and press .

  2. The Service Menu will display the first six options.

Version 3.1 displays only 4 options.  Version 3.5 and later displays 6 options on the first screen.

  1. Press to view the second screen, showing options 7 and 8 .

1 - Baud Rate

2 - Language Selection

3 - Zero End

4 - I/O Control Menu

5 - Debug

6 - Serial Number

7 - Global Clear Cut Lists

8 - Compact Cut Lists

  1. Click on any of the links in this table to advance to detailed information about the option.

  1. Press to exit the Service Menu.