Access
the Service MenuTigerStop Manual 4.72
Cut lists are compacted using the Compact CL operation, available at the
service menu, screen 2.
Compacting makes more room for cut lists in memory
Compacting may resolve the problem that causes the "Check Sum Failure - Stop to Bypass" error message to appear.
TigerStop automatically compacts cut lists in memory, but compacting should be done manually at the service menu whenever cut lists have been globally cleared.
To compact cut lists in TigerStop memory…
At the service menu 
press 
to advance to the second screen of the service menu.
At the second screen 
press 
to select compact cut lists.
At the prompt 
press 
if you want to compact memory.
After you press
to compact cut lists, the display returns to screen 2 of the service menu
.
Press 
to return to the Ready screen, which will
display a numeric count down of the cut lists being erased in the lower
right corner…
|
|
|
|
When the normal flashing measurement
unit indicator re-appears in the lower right corner of the Ready screen,
the compacting operation is complete 
.
Access the Service Menu and run Compact CL again.
The service menu must be exited before compacting the cut lists. The changes take effect upon the second exit.
