Access the
Service MenuTigerStop Manual 4.72
The first setting in the Service Menu is the controller
Baud Rate.
In version 3.0 it appears as 1 - Baud.
In version 3.5 and later, it appears as 1 - BR.
The baud rate for the controller and the PC's com port must be set to the same value.
To change the baud rate…
At the service menu
press 
to select the Baud
Rate parameter.
The top line of the screen displays the current baud rate, the bottom line displays the new baud rate.
Press 
to cycle through
the available baud rates from highest to lowest…
|
|
|
|
|
|
|
|
|
|
…and then it returns to |
|
When the
desired baud rate displays, press 
to select it as the new baud rate and return to the service
menu .
To exit the Service Menu, press
.
The baud rate change takes effect upon exit.
