| 
TigerStop®
Automated Stop/Gauge and Pusher System
TigerStop is the affordable, programmable digital stop and
push feed system you have been looking for!
The position can be input in the method of your choice: standard
or metric with fraction, decimal, feet, inches. It is available
in multiple languages. The controler computes the input and
displays the position in standard or metric.
1. GO—Enter any length on the keypad
in inches, inches and fractions, decimal inches, even feet,
or metric increments, and press START. TigerStop instantly
moves to that position.
2. GO SET - Turn TigerStop’s number
keys (1 to 99) into hot keys to access custom lengths that
you cut frequently.
3. INCREMENT - Hit the INCREMENT key and
enter a value (+ or -) to move the stop relative to the current
position. Continue incremental movement by hitting START.
The stop will move by the value you entered.
4. PUSH FEED - TigerStop can be used as
a push feeding system. It allows for saw kerf, and deliver
finished lengths on the outboard side of your saw or machine
tool.
5. SET POINT - Use TigerStop as a set point
stop system and enter up to 2000+ lengths into its powerful
memory.
6. CALCULATE - With TigerStop’s built-in
10 key calculator, you can calculate a new length based on
your last position or on a new value. After doing the calculation,
TigerStop moves to the new position.
|
|
 for detailed specifications on the TigerStop. |
 |
